February 22, 2023
Description
This design is heavily based on the RepBox Prusa listed on the website, but for $299 I opted to build my own. I think it cost about $100 to build if you have access to your own laser. The files included have the original Fusion 360 step for anyone to make design modifications as well as the dxf files I sent to the laser. I did not use any kerf compensation and it fit together perfectly.
The hinges are from mcmaster https://www.mcmaster.com/1635A102/
Screws are M4.
License:
Creative Commons — Attribution
7
Frank Wiebenga
