VW Caddy Crafter Transporter ceiling light LED conversion plate

1. This is only support plate for leds. Yoy can use led strips, led COB or what you have - glue it to this plate
2. This is plate for lamp with vw part number 7e0 947 105e and  7e0 947 105f - used in VW caddy, transporter, crafter etc cars. Mayby it will work with other versions - I dont know.
3. THIS ITEM SHOULD BE PRINTED IN ABS (or PETG at last) - not PLA. PC will be best. 
   PLA works in hand and is usefull for testing, but  in car, inside lamp, in full sunlight - will be too hot for PLA,  it will be melted and make big troubles and maybe fire. Dont use it here.

Led plate have 3 standoff with blind holes - can be drilled thru (2mm drill) and thru holes - driled lamp base, 3 small screws and plate is mounted. Or you can use some glue. 

Side mounts have 2 holes for some bare wire winding - it should contact with lamp electrodes and works without soldering.