RG300/RG35xx Retro Gaming Handheld Grip

Simple remix of the Retro Gaming Handheld Ergonomic Grip by gevo4258, which slightly adjusts the opening at the bottom so that the grip can be used with the Anbernic RG300 and RG35xx.

Can be printed with PLA, but needs support. Mine was printed with the following settings:

• Nozzle: 0.4mm
• Line width: 0.44mm
• Layer height: 0.2mm
• Walls: 3
• Bottom/Top layer: 3
• Infill: 15%
• Support: Yes
   

Also have a look at my other grip, which is a from the ground up new design and comes with additional accessories: Anbernic RG300 Grip, Front Cover, Stand