Parametric Shower Head Extension | Customizable Design

This is a parametric design that allows you to place your shower head where you want it. 
Often shower head mounts are installed in places that are not ideal to avoid drilling into a tile, for example.

Open the f3d file in Fusion and add your desired values in the parametric settings.

If you are unsure whether your measured values will really fit, you can cut the exported model in your slicer and print only parts of it for testing.
If you need this holder mirrored you can also do this there.

Very important:

Consider your material choice. Use a filament that can withstand permanent loads. PLA is not suitable for this. The number of perimeters and the amount of infill should also set high enough.

Check the accuracy of fit. A bad fit can cause the shower head to fall down and damage it or the shower tray!

The "WidthGap" dimension should be chosen as large as possible, this will prevent the extension from twisting in the showerhead mount.
Don't make the extension to the front too long, otherwise this can also lead to twisting of the shower head bracket.

Please leave a like if you enjoy my design. Also feel free to check out my other uploads. :)