PC Engines APU4d4 Half Rack Mount

This is a 1RU Rack mount for the case1d4blk enclosure for the PC Engines APU4d4. It is printed as a half rack mount so the other half can be used for mounting other equipment. I have included 1RU blanking plates for the other side. Both sides can be joined using M5 bolts and nuts.

There is also a brace that can be printed that uses m5 bolts to hold the enclosure down

I have printed in PLA as there is not much heat in the part of my cabinet where this is mounted, but you may want to print in PETG depending on the location. I printed the part with the front face down on the bed and no supports where needed.

This may also be able to be printed for the other variations of the APU and enclosure.

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK2.5

Rafts:

No

Supports:

No

Resolution:

200

Infill:

30%

Filament: esun PLA black