Makita 18V LXT battery T12 soldering station V2.0

This is my second attempt so build a portable soldering station for the makita LXT 18V battery environment.

I improved the old version a little bit. It's still not perfect, but it works for me.

There are some new features:

• ON/Off switch
• Threads on the sides for additional modules
• Iron stand module 
• Tip cleaner module(also holds two spare tips)

If you want to add new modules, feel free and get creative.

I added a step of the whole thing, if you need to improve/modify it.

You will need the following parts:

• KSGER STM32 OLED V2.01 Temperature Controller (AliExpress: https://bit.ly/3jZalin)
• Makita Terminal Adapter (AliExpress: https://bit.ly/3vPj6OQ)
• OR: https://www.printables.com/de/model/200596
• Some wires
• 2x M5x8mm
• 2x M5x12mm
• 8x M4x5mm melt-in threads (If you use the controllerbox_melt version)
• 4x M4x25mm screws to mount the cleanerbox
• 3x M4x5mm screws for the iron stand
• 1x M8 nut for the iron stand
• On/off switch
• Brass wool for the cleaner

Additional:

• T12 Handle (AliExpress: https://bit.ly/379PiQg)
• T12 Tips (AliExpress: https://bit.ly/33lPRoG)

I used this part from Gary Platek :https://www.thingiverse.com/thing:352094. Thanks!