June 10, 2023
Description
This is a mount for the BTT EBB42 toolboard for Eva 3.x with Orbiter 2.x extruder.
Two versions available: one with a mounting option for piano wire inside umbilical cord, one with mounting option for the outside.
Piano wire can be secured with a M3 grub screw.
For the heat insert version you need 3mm spacer for the EBB42.
Cable tie channels to secure USB-C and power supply connector and cables.
I suggest to use brass spacer. If you don't have some you can use the printed version, but you the length must be adjusted to your needs. Provided 20mm length should fit with an Orbiter. Due to user feedback the LGX Lite Version must be shorter. M3 by 4mm heat inserts are needed.
2023-03-12:
- 7mm diameter spacer (instead of 8mm) added
- Endstop Spacer for RatRig VCore added
2023-04-25:
- Complete Redesign to make the holder more rigid and variable for other extruder
- Mounting holes for Orbiter 2.x corrected
2023-04-25:
- Heat Insert Version added
2023-04-26:
- LGX Lite versions added for all variants
2023-05-08:
- Sherpa Mini version added for all variants
2023-05-16:
- LGX Lite version updated due to an design issue
License:
Creative Commons — Attribution
7
mmuellerphoto
