PIP Needle nose pliers

I was looking for a tool to print for a friend and was inspired by a design is saw as a print in place pliers. I tried it and it didn't work. The slip ring tolerance wasn't enough so i did a complete redesign in Fusion 360. And while i was at it i made it a two-color print.

The circles on the dual print models are necessary to align the two half's of the model, just place the four models with circles at 0,0,0 and they should align.  A couple of times i needed to rotate one of the models.  

I include to support files that you can use to hold the tip to keep from raising from the print bed. The tips are thin so they can be used instead of a brim support.