Storage box for Tesla Model Y front seats

Two-part print. Use glue and  filament as connecting plugs when piecing together both parts.

Update # april 24: Reduce the height from 110 mm to 100 mm in order to get better clearance due to carpet thickness variations. Slim Version is 100 mm by default.

Print using supports as picture illustrates. If printet laying flat with supports on the outside, make sure to sand down anything the car fabrics might catch on to.

Optional: Glue fabric on the inside to reduce rattle noise from items sliding around. I used cheap speaker fabric. Put a strip of velcro (female side) on the sides of the shelve for a more firm fit.

Made with measurements from a TMYP -23.

Update # November 2023:

• V2 versions
  • Added full model slim and large (merged parts)
  • Part 1 and 2 is now available in Slim size. Found this size to be my favourite.
    • Height and width is just so slightly adjusted for better fit.

Printed with Prusa Mk3s. Designed in Blender. 

Enjoy. Please leave a like and feedback is welcome.