Bambu Lab X1C Flow Calibration

Update July/17 2023:

Updated GCODE with the new calibration pattern from Bambu Labs

Now including PC and PA-CF as well

===

Update Mar/8 2023: Added GCode for TPU as well in the ZIP File

===

This simple model just enables a flow calibration on a Bambu Cold Plate (PLA) or Engineering Plate (ABS, PETG).

As Bambu Lab stated, the automatic flow calibration on the X1/X1C using LIDAR on a textured plate shall not be used, as it leads to unpredictable results.

Therefore I made a small print file to just perform the flow calibration on a cold plate or engineering plate. The X1C stores the flow value and then can be used on the textured plate.

The flow calibration just takes a few minutes before the actual print and is easy to perform.

Unfortunately Printables does not allow GCODE from BambuStudio - so I packed all three GCODE files in a ZIP >> it contains flow calibration for PLA, ABS and PETG