March 1, 2023
Description
A simple quick-printing stand for curved lithophanes. The slot has a small 10° backwards angle and a tolerance of 0.2mm for a snug fit. The stand is about 40mm deep and 120mm wide.
The stand should fit lithophanes from https://tool.itslitho.com/ with the following specs:
Make sure to note the height that matches your 100mm width before you change from “flat” to “arc”; if the height changes, restore it, otherwise the curvature will be wrong.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Dark Squirrel Designs
