Frässchablone / Router Template / Corner Radius Jig (DeWalt 6x12mm Clamps Remix)

Remix of the great corner jig for routers by Woodenti to be usable with DeWalt guide rail clamps with a 6x12mm profile (see photos). The new holes are all-through, so that the clamps can be fully inserted. All files except for the template base (router-template-dewalt.stl) are unmodified. For assembly, you need an M4 nut and an M4x12mm hex bolt.

Note that your printer should be able to bridge a 13mm gap, otherwise you might need to experiment with support structures. For my print, it worked perfectly without support (see closeup photo). Printed with PLA and 0.20 layer height.

Also note that this is based on the reduced clearance version.