Tessellation/Tiling Coaster Collection

A collection of raised drink coasters done in various tessellation/tiling patterns. I use these all around the house in various colors and they work great. The pattern is raised so the moisture can collect down in the negative space of the pattern.

I have fitted the bottoms of mine with circular-cut cork with adhesive backing. They provide a nice, stable and slip-resistant base of the coaster.

The overall diameter of the coaster is 89 mm with a height of 6mm. The inner part where the drinking vessel sits has a diameter of 85 mm with a height of 4mm, which is offset 2mm above the negative space below.

Print Settings

Printer Brand: Anycubic

Printer: All-metal Mega

Rafts: No

Supports: No

Resolution: 0.2 mm

Infill: 15%

Filament: PLA
Notes:

These are designed to be printed with an extrusion width of 0.4 mm. The walls of the design and rim are 2.0 mm wide, so a width of 0.4 mm give you 5 evenly spaced perimeters. Mine are printed in PLA and hold up just fine, even to a cup of coffee.