[Error]A+ A7S2 reef tank led light lampshade

Please do not print this version. Use PETG to print it, and it will be baked by the lamp(pic2 and pic3)

Prevent light from leaking. Used for 30 square tank.
Maybe compatible with A7S1, not verified.
Please print with ABS/PETG !!
It is really hot near the LED. Please use the above two materials to print. There is a risk of softening when using PLA.
Material:

• 4*Cylindrical magnet M8 thick 5mm
• AB glue(or other glue)

When installing, pay attention to the direction of the magnetic pole of the A7S2 body.
Use AB glue to bond the magnet. 
Install two magnets per hole.

给30方缸用的，防止灯光逸散。
或许能和A7S1代兼容，但未经验证。
请使用ABC/PETG耗材打印
灯珠附近很热，用PLA材料有可能受热软化。

所需材料：

• 使用4颗M8厚5mm圆柱磁铁
• AB胶

安装注意磁极方向能与灯体吸合。
使用AB胶粘接磁铁。
两个洞，每个洞两个磁铁。