Cat Scratcher Wall Corner Mount

Install this to a wall corner with 3 #10 construction or sheetmetal screws (into the metal reinforced corner on most walls)  This will be a 3.5mm construction screw or sometimes colloquially called “spax” in Europe.  The main outer shell of the model can be printed in vase mode but only if you use a large nozzle or a wide line width and slower speed.  I am using a 1mm nozzle for my vase mode print.  I have a work in progress vase mode optimized version for smaller nozzles in the works but it is not finished yet.  Pretty much any material is suitable here I designed it to be a gentle enough profile for the cat that PLA won't be an issue.  PETG, ABS, Nylon, or a stiff 95A TPU would also be great!