RatRig V-Core 3.x Power Box - Mini Edition

Powerbox for RatRig V-Core 3.x. Keep your mains writing tidy! It is unlikely that you will have the exact hardware, but please use this for inspiration and provide remixes. This remix is specifically for small V-Core printers, e.g. the 200, where space is at a premium. 

BOM

Assembly

1. Insert heat inserts into box
2. Insert thin magnets into cover
3. Insert thicker magnets into box 
4. Attach IEC to back cover plate with 2 nuts
5. Attach back plate to box with M3 screws where the heat inserts are
6. Wire everything up as you see fit, run wires out of the bottom of the box
7. Attach front plate with M5 screws and t nuts
8. Attach to right side of machine with 3030 t-nuts

Printing

No supports needed, 3-4 perimeters, 20% infill 

CAD

Available @ OnShape