Wall mounted dowel rod holder used for rig rack

Inexpensive way to hang your rigs.  I used PLA and 40% infill.  Less infile might be fine… I didn't experiment.  I designed it in OpenSCAD, so it will be easy to modify if needed.

The hole has a slight angle to it in order for the dowel rod to slant in a direction that will insure the rig does not slide off.  Make sure when you attach the mount to the wall that the hole is angled properly.  You'll be able to see the amount of material on the top and bottom areas of the hole are of different thicknesses.  The thinner one goes to the top.