Niagara Falls LED Water Fountain

Were you planning on visiting the Niagara falls this summer, but were unable to due to the current pandemic situation? This model brings the falls to you! It is modelled after a portion of the Canadian side of the falls and also lets you view the Niagara Falls lights shows from the comfort of your home. To assemble, fill the base with water and get a small water pump to go inside. Attach the pump to the tube extension coming out of the base of the falls. The main falls must be glued properly to its base so that the built-in hole is unimpeded, it was only separated to make it easier to print. Then, LEDs can be mounted in the front portion of the falls, with wires routed through the hole in the main portion of the falls out the back to a power source or Arduino for RGB colour control. The front portion can now be glued to the main portion once set up.

This was entered for the Lights competition as it involved the use of an LED array as part of a display and water fountain.

This model was created using Fusion 360.