Simple Resin Lid Mount

Simple device. Screw holes are sized for standard drywall screws. 

For best results print out of PETG or ABS with at least 4 walls and 50% infill.

Try to hit a stud with one of the screws or use drywall anchors. Trying to screw to drywall alone is not recommended.

I have not tested this in the long term yet so i am unsure if the holder will support the lid for extended periods of time. It seems to be doing great right now but use at your own risk.

I tried to design this to work with a broad range of resin printer lids as well as the lids for wash & cure stations. I am reasonably confident the bracket will work with all of them but if you happen to find something it doesn't work with please let me know.