March 18, 2023
Description
Sometimes it's just good to have a few rolls under whatever you want to move!
The transport rollers can withstand quite a bit of weight depending on the selected print material. I recommend to use one of the printing profiles. I have tested those and have achieved very good results.
The Roolers are made for use on even grounds so if you cary heavy stuff it better gets not to bumpy!
The tollerances of the model are intentionally chosen very tight to ensure better durability. Depending on the chosen material an your printer calibration it may be necessary to use a little more force or some rework. In my case, i place the bearing a bit into the Wheel and then step on it to prerss it into
The Rollers can be used with or witout Tension belts. The tesion belts can be easily threaded through the roolers.
Material for each roller:
Additional Material for use:
Sometimes the rollers should be fixed under whatever you want to move, for this you need…
For example someone like those…
For the optional soft wheels you need two o-rings with a diameter between 20mm-25mm and a thickness of 2.4mm. Because there are so many possible o-rings i have provided you with the step file of the wheels so you can adjust them to your needs if necessary.
Simple print
No support needed
PETG or PLA on 0.2mm or 0.3mm, 15% Infill of course with original Prusament!
For 0.4mm Nozzle: Minimum 7 Parameters!
For 0.6mm Nozzle: Minimum 5 Parameters!
Happy Printing!!!
License:
Creative Commons — Attribution — Noncommercial — Share Alike
GiantBrain
