March 11, 2023
Description
It is suggested to print this riser in PETG, ABS or ASA (in case of the last 2 consider also shrinkage).
To reinforce the air purifier container put modifier to 100% infill in the yellow area.
Supports are needed just for the air purifier contaneir, put support blocker where not needed.
Printed in PETG, for the led I used 8mm COB led strip 24V with external power supply but any 8mm led strip is ok.
The logo was added later, printed in PLA and press fitted into the holes.
License:
Creative Commons — Attribution — Noncommercial
7
Scu
