Car baby cam holder

I have a baby camera that shows the child seat in the car and the mount it came with was inadequate which made it fall off or turn around. I've made this generic camera mount from an existing phone mount by making the holder parts shorter. I'm adding alternative holder parts which is longer (titled longer in file names) in case your camera is bigger (if you happen to have a camera that is even bigger you could use the longer phone holder parts from the model I remixed, but your camera might turned out to be too heavy for the mount). 

Print instructions: orientation is recommended to be like in the screenshot from the slicer. The reason is that screw should be aligned with the z-axis to print the threads better, the exception is the car mount which is printed on the side despite its threads, otherwise the 2 long parts would be weakly connected to each other because they would be separated by different layers. Infill is recommended to be 100% for the cam holder screw, and high for the car mount. I printed with PLA and PETG. PETG works better for the car mount.

Installation instructions: the car mount slides between the fabric and plastic as shown in the picture. Use the ball connector and ball screw to connect the car mount parts with the cam holder parts.