Plant Marker Chili Sign - 4 color (manual) filament change

A cool Chili that will remind you where you planted which plants. It prints as a four color print, but you don't need any multi material system to print. It can all be done using easy filament swaps. Here's how:

Load the step file into Prusaslicer, it will automatically recognize the design as a “Logo” and you can tell it to automatically apply color change. (Option pops up in the bottom right corner.) 
Here are the layer heights from bottom to top in case you want to set the M600 pause command manually :

• 1.2 mm red (M600 @ 1.35 mm height - if using 0.15mm layer height)
• 0.6 mm white (M600 @ 1.95 mm)
• 0.6 mm black (M600 @ 2.55 mm)
• 0.6 mm green 

I use 0.15 mm layer height but with the 0.6mm color divisions it's also compatible to print with 0.2 or 0.3 mm.

You can simply write on the white sign using a pen.

Happy printing! If you do print this, you'd make my day by sharing your Make :)