April 9, 2023
Description
To avoid the big IKEA clamp which came with the Jansjö lamp I made this small bracket which fit in a kitchen cabinet I use for my 3D printer.
Holder one: All cabinet which got 50 mm between 5 mm holes.
Holder two: All cabinet which got 32 mm between 5 mm holes.
Heat the threads on the lamp before screwing it in the holder.
The square hole for the switch is 11 mm x 5.8 mm. The inner hole for the switch tap is
3.1 x 6.5mm.
License:
Creative Commons — Attribution — Noncommercial
Lean 3D
