3D Printer Belt Tensioner Cap with F3D

3D Printer Belt Tensioner Cap with F3D

The model is available for free download and use.

If you still want to invite me for a coffee for my effort, troubles and time, you can do it via:

https://www.paypal.com/paypalme/avicode

I designed this because typically from the Y-Axis tensioner the metal screw sticks out, and has injured me a couple of times as they stick out dangerously from the shelves I put the printers on.

I printed them in Spiralize Mode with 3.5mm base height - so that I get the top part spiralized.

However, as you can see in the images, the top angle with spiralize with 0.6mm was too much for the print, and there was some defect.

But since this cap is purely for safety and it still does the job, I went with it.

Thanks!