Spice Bar - stackable Spice holder (REMIX - bigger)

A remix of Taer.Holmes' Spice Bar.

I made the model larger to accomodate for bigger spices bottles.

This version will accomodate spice bottles up to 138mm high and 57mm diameter (round). Should fit most of the bigger spice bottles out there

I removed the screw holes from the original model as I prefer the cleaner look, and if need be you can just drill a new hole.

I am supplying the full model (which is too big to print on my Mk3s+) and also a “split” version with the left and right side printing separately. On the split files I added “joints” to make assembling the 2 parts easier and cleaner (use superglue).

I recommend printing with the back laid down on the surface, using supports but NOT in the joint holes as supports will be very hard to remove from there. Bridging of those went fine on my side.

Also recommend printing the top at 101%-102% scale to make sure it fits the rack part.