Shutter Box - Mini (Carabiner Version)

A small circular container with a sliding shutter door and a carabiner loop!

https://youtu.be/6Nzt53SJRzs

https://youtu.be/sBsHtqxGVIw

https://www.youtube.com/watch?v=3nYm0oPaSr4

Printing

• All parts can be printed without supports
• Shutter can be printed flat or vertical, but flat is recommended

Assembly

• Test fit carabiner before assembling. Smaller clips may be able to fit if you attach it mid-assembly.
• Slide shutter into the track in the bottom case. Align the top case and then press firmly.
• If the top case does not click into place, double check that the shutter is in place. It also may help to snap one side in at a time.

Can I sell copies of this?

Yes! This project was shared under the Creative Commons - Attribution license.

This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.

Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.

Click here for attribution examples