Shower bin

A small bin for empty tooth paste, fallen hair, and random trash you don't want wandering until you finish showering. The idea is that it doesn't hold water so it's easier to throw out the contents later and avoid still water.

The design is from very cool model I remixed and credits go to SASSy Design (https://www.printables.com/social/121750-sassy-design/about). The original was created to print in vase mode but since I wanted holes at the bottom and some on the sides I modified it to be hollow. You would need to add modifiers to let the water out. In Prusaslicer I added “height range modifier” from height 0 to 5 and for “layers and perimeters” I put 0 for top and bottom solid layers and 0 perimeters. You also need the infill to allow water to exit from the sides and not just the bottom. I chose to go with 15% infill gyroid which gives the aesthetics and utility I was looking for.

You can find a ready 3mf file with the modifiers already in place, and a gcode file for PLA with layer height 0.2.