Oil filter wrench

Oil filter wrench for many Peugeot, Citroën and some others. Has a ½" square drive for your ratchet. Tested to withstand a torque of 70 Nm and having only minor deformation in the ½" square as a result. Since the clearance on the ½" drive is relatively tight, I have included a test piece to test fit and calibrate your settings like hole expansion without wasting to much material.

The following oil filters are tested:

OEM Peugeot/Citroen 1109AP
OEM Peugeot/Citroen 1109N3
Bosch 0 451 103 261 
Bosch F 026 407 143 (tested by Cicicok) 

They got a diameter of 76mm and 12 indentations. If you tested it on different oil filters, then please leave a comment, so that I can add them to the list.

For more reference numbers you can take a look at the Bosch website.

My print settings:

Vehicle list:

According to the information I found it could possibly fit on the following cars, depending on year and engine.

Chrysler:

PT cruiser (tested by Facundo)

Citroen:

AX, BX, CX, ZX, C15,C25, C35, C4, C5, C8, Berlingo, Evasion, Jumper, Jumpy, Saxo, Visa, Xantia, Xsara, XM

Peugeot:

106, 205, 206, 305, 306, 309, 405, 406, 504, 505, 604, 605, 607, 806, 807, Boxer, Expert, Partner

Fiat:

Ducato, Scudo, Ulysse

Hyundai:

Lantra

Lada:

Niva

Lancia:

Zeta

Nissan: 

Micra

Renault:

Megane 2 gasoline 1.6 16V (tested by Florin)

Rover:

100, 200, 400

Suzuki:

Baleno, Samurai, Vitara

VAG:

some, depending on the oil filter (tested by Cicicok) 

Updates:

• 2025-12-09 STEP file added