Beacon probe mount for Voron tap stealthburner

UPDATE 25/3/2023

thickened bracket as noticed it heat creeps over time. this reduces the amount tap can move but should still trigger.

print standing on its end.

Uses 

4x m3 heatsets

2x m3x10 

Attach probe to bracket with included small screws 

Attach the bracket to tap carriage with 2 m3x10 screws in the bottom by replacing the existing 2x m3x6 screws from tap

probe y offset = 65

probe x offset = 0 

note may have to add something to physical end stops if beacon interferes with homing hitting on rear motor. hall effect end stops work without adjustment 

Used tap cad files and beacon cad file to help with design found here 

Tap

https://github.com/VoronDesign/Voron-Tap

Beacon 

https://github.com/beacon3d/docs/blob/master/mcad/beacon/Beacon_RevD_Assm_Normal.STEP