4040 drawer

I moved the printer and everything fell out, so I redesigned it. 

I added a back stop, so nothing can fall behind the drawer.

I added a holes for 6x2 magnets, and used cut off bolts in the end. now the drawer needs a little pull. I added 4 holes, because I was not sure if 1 magnet would be enough.

I added slots for hex bits, and 12mm OD sockets, keeps them more organized.

I lengthened the drawer to 130mm, because the side I measured one side…. I added a 100mm drawer because the other side has a bolt in the way.

the whole thing is assembled with an M3x20