Topping D90 / A90 Feet

Topping D90 / A90 Feet

I wanted to increase the space between my Topping D90SE / A90D dac/amp stack as this gets very warm to the touch and the existing rubber feet are only 5mm tall. I also wanted space to run my headphone cable underneath my amp.

I doubled the space to 10mm (w/cork), and added a 2mm inset for 3mm cork to protect the A90 from getting scratched from the feet. Used matte black PLA and took less than 10 mins to print each one at standard quality.

The feet stick on over the existing feet for a good friction fit.