March 17, 2023
Description
This adapter allows perfect fitting of Fiberlogy Refill filament bundles onto Bambu Lab Reusable spools, or self printed spools that have the same size and notch as those of Bambu Lab.
It has cut-outs to allow the tie-wraps go in and cut them while the filament is on the spool. Furthermore, I created the notch for the Bambu spool on both sides for convenience reasons.
The adapter can be put directly onto the Bambu spool, is should fit snuggly but not super tight.
Recommended to print it with PETG or ABS so you can also dry your filament without worrying too much about temperature!
My example was printed with the default 0.2mm profile.
Feel free to give me feedback if something is not working out for you! :)
License:
Creative Commons — Attribution — Noncommercial
7
Flight777
