March 18, 2023
Description
I added a base plate, combined the two back pieces into one, extended the mount and arm/levers so that a bigger material could be drilled, and added a cover.
The cover has a cut out for a switch and holds a 9v battery as well.
Add a dab of hot glue to secure the pins/handle/base/cover and some screws for the arms/mount. I had some hanger mount loop screw things that worked well.
Use a rubber band or hair tie for the return.
The image uses all of the BIG parts and the old design are SMALL.
Motor https://www.bgmicro.com/MOT3N.aspx
Switch https://www.bgmicro.com/SWT1106.aspx
chuck https://www.amazon.com/gp/product/B0052Z9TJG/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
bits https://www.amazon.com/gp/product/B07N44JN33/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
.20
Infill:
20%
Filament: Inland PLA blue/black
Notes:
Print the pins and handle with supports, they may or may not need to be scaled up/down depending on how they fit.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
8
Drakorex
