Corsair 570x Glass Standoffs - Remove Dust Filters

These are replacement standoffs for the 570x case. The short ones are used for inside of filters or the top front plastic. The long ones are used if you want to remove the filter and still use the glass. These use the original thumb screws.

My top fans are exhaust so they do not need to be filtered but I did not want to cut the mesh since all replacement parts are sold out from Corsair. This situation needs 2 long (back) and 2 short (front) replacements.

To remove both filters you will need 6 long 2 short.

My thing for side panel spacers: https://www.thingiverse.com/thing:4756193

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

.2mm

Infill:

Filament: none PLA Black

Notes:

Category: Computer