July 27, 2023
Description
This is a basic enclosure that allows to use C/CS lenses with cheap HBVCAM 1901-720 usb cameras (the sensor on these is tiny: don't expect a DSLR-like image quality!).
Note that this enclosure is made to be screwed on a flat surface (that can be a small board), so no backside is provided.
The lens is held by simple friction fit (no actual threads).
Supports:
Yes
Notes:
There is unfortunately no good way to print this: you will need supports.
When printing with the bottom on the printer bed, to get the finer details of the peg ends (that prevent the camera from moving), it may be useful to use soluble support.
To use a C or CS lens, you will need to remove the original lens. It can be unscrewed, holding it gently with pliers (Pliers like Engineer's PZ-58 work well for this).
License:
BSD License
nbernard
