Rackmount for Orange Pi Zero

Krapozok imagined a system of mounting brackets for mounting Raspberry Pi in a 19" rack using existing hardware. This thing allow mounting an Orange Pi Zero in the same fashion (see Krapozok's https://www.thingiverse.com/thing:1793758 for info on the hardware on which this is to be mounted).

Like in tkramm's version (https://www.thingiverse.com/thing:2759317), this mounting bracket is in two separate parts (face-plate and board support).

NB: on the "in situ" picture, this thing is on the left; On the right is the version for Orange Pi R1 (https://www.printables.com/model/427623-rackmount-for-orange-pi-r1).

Print Settings

Rafts:

Doesn't Matter

Supports: 

Doesn't Matter

Notes:

Print one of each part.

I printed this in PETG using 30% infill (3D honeycomp) and 4 perimeters but those are my personal default settings.

Post-Printing

Use (up to) four M2.5x8mm screws to attach Orange Pi Zero to the "support" part and two M3x12mm screws to attach face-plate (shorter screws may work too).

Category: Computer