October 12, 2020
Description
These are two parts for a 10x10 E-Z Up canopy, Encore II model. There are some other parts on thingiverse, so be sure this one fits yours before you print (unlike what I did before I designed these). I printed them out of Taulman 910 so they'd be extra strong, but PETG or ABS would probably work fine as well. I beefed up the parts a tad, making some walls thicker without affecting the critical dimensions. You might have to ream out the bolt holes on the wings slightly, they were a bit tight after printing and I didn't update the model.
It does need supports because there are some 90 degree over hangs.
These are two parts for a 10x10 E-Z Up canopy, Encore II model. There are some other parts on thingiverse, so be sure this one fits yours before you print (unlike what I did before I designed these). I printed them out of Taulman 910 so they'd be extra strong, but PETG or ABS would probably work fine as well. I beefed up the parts a tad, making some walls thicker without affecting the critical dimensions. You might have to ream out the bolt holes on the wings slightly, they were a bit tight after printing and I didn't update the model.
It does need supports because there are some 90 degree over hangs.
License:
Creative Commons — Attribution
9
theamzngq
