Moto Guzzi V85 TT air duct for rear ventilation of the windshield

simple air guide for mounting on the original windshield holder. May help with booming wind noise by rear ventilation of the windshield. Due to simpler printability, the part must be adjusted to the curve after printing using a hot air gun. In addition, the windshield must be modified to ensure an inflow. 

Depending on the country, the use in road traffic may be prohibited! Use at your own risk!

Print in PETG or ASA, supports are needed for the angled section

Update, 26.3.2023: v2 reaches further down and has the radiuses fixed. “Advanced” adds more fins, mainly to look more technical because more technical=more better. Does it help? Maybe.

Update 31.3.2023: figured that the model might be a bit thick, especially the “advanced” one. There is now a thinner part available with reduced thickness from 3 to 1,5mm