Torture Test Trophy

A torture test for your 3D printer. Successful print and assembly earns a trophy!

Printing

This is an intentionally challenging print. Before attempting, make sure that you have good bed adhesion, filament that won't blob or string, and well-tuned retractions.

• No supports (this is a torture test, after all)
• The trophy comes in 2 nested parts. The intended challenge is to print these at the same time as shown.

Assembly

• Unscrew the base of the trophy from the top.
• Reposition the base and screw it back into the top from the other side.

Can I sell copies of this?

Yes! This project was shared under the Creative Commons - Attribution license.

This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.

Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.

This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.
 

Recommended Attribution Text

"Torture Test Trophy" (https://3dprinty.xyz/project/77) is designed by 3D Printy (https://3dprinty.xyz) and shared under a Creative Commons Attribution (CC BY 4.0) license (https://creativecommons.org/licenses/by/4.0/).