LED Lightbar prusa mk3 mk3s mk3s+ remix

I really liked dubs49's design.  Unfortunately, a quick print of a cross section of their bar showed it wouldn't fit the LEDs I had on hand.  So I redesigned the bar from scratch to use the leds I really wanted to use.  https://www.amazon.com/LEDENET-Double-1200LEDs-Flexible-240LEDs/dp/B00NHRFAQW/

Knowing how “secure” the adhesive is on LED strips, I added some retaining clips as well. These clips are quite tight as I didn't want them rattling while printing.  I slid them on from the side while sliding in the LED strip.  These clips provide enough pressure that I didn't use the adhesive backing.

The original source model was not provided and I really liked dubs49's design of the mounting arms, so I didn't remodel that.  Perhaps I will do that eventually, but I'm ok with the slight under-hang of the lightbar.

Assemble the bar with M3 nuts (it's tight, but it fits!) and M3x14 bolts with a thin washer on top.

PETG 0.25 45% infill