Ridiculously over-engineered printed-in-place no support no brim adjustable tilting phone stand. I like to design things and i also like to challenge myself ! So one thing leads to another even if the design is complete madness ;-)
Be advised, this model is not easy to print
- Consider this model as a torture test for you printer, filament profile and your skills
- Note that this model can be resized for easier printing, try 120% for example
- You may also consider trying this simpler and easier to print resizable Phone Stand
If you liked this model and want to help me by supporting my hobby
- Dont’t forget to post your make on Printables and/or Social Media
- You may also look into my store for my Improved Phone Stand
Features
- Stand is suitable for a 14mm thick phone
- Notch for a 2.6mm phone charger cable
- Inclination of the stand is adjustable
- Slide Out to adjust / Slide In to lock
- Integrated locking mechanism
- Resizable at least to 120%
- Print in place
- No Support
- No Brim
Print Instructions
- Print the model on it's side (already in the correct position)
- Use Default 0.20mm QUALITY Prusa Slicer Print Settings
- Filament : PLA or PETG
- Recommended custom settings
- Paint-on Seam : Highly Recommended
- Avoid crossing perimeter
- Infill : Gyroid 15~20%
- Perimeters : 2~3
- Support : No
- Brim : No
DaHouzKat
