Phrozen Sonic Mighty 8K Vat Drip Stand

This drip stand takes inspiration from a few others out there in particular https://www.thingiverse.com/thing:4671138 and https://www.thingiverse.com/thing:3784926 

It is designed for the 32.5mm height vat of the Phrozen Sonic Mighty 8K. The idea behind the stopper brackets is to make it easier to print with less supports and to quickly adjust the height.

Printed Components

• 1x top cap
• 1x vat bracket
• 1x funnel bracket
• 2x stopper brackets
• 4x screws

Other Components

• 2x 16mm diameter x 600mm length pipe/rod
• 1x thick cement/concrete tile

See render for construction reference.

Drill two holes with a distance of 35mm between each's center in the tile at the appropriate location for the size of your tile so it results in a solid base for the stand. Make sure you space it in such a way that the bottle of resin can comfortably fit.

Alternatively if you have a workbench that you can attach it to then you can drill two 16mm holes with a spade bit and print a third stopper bracket and two screws. Use the third stopper to hold the unit at the required height against the workbench.