IKEA Sandshult Bracket - Kitchen Roll Holder

Two sides of a kitchen roll holder, that can be easily mounted on the IKEA Sandshult shelf bracket, to hold a 22mm diameter wooden pole about 55cm in length. Printed in two pieces each side to avoid overhangs, which can then be superglued together.

To print:

• Print all 4 pieces
• Infill 25%
• 0.4mm / 0.6mm nozzle recommended (but any would work)
• PLA
• 0.3mm layer height

To assemble and use:

• Rests on the inside of the IKEA Sandshult shelf
• Can hold kitchen roll up to a diameter of 16cm
• Will need a wooden pole about 55cm in length, with a diameter of 22mm
• To take one side on and off, the two pieces can be lifted and slightly rotated forward

Printed in GEEETECH White PLA.