Mario Boo Ghost

A Mario style ghost floating around, suspended by his enormous tongue! Haha

Check here for the King Boo M&M stash pot version, https://cults3d.com/en/3d-model/art/king-boo-m-m-container-stash-pot

Been wanting to design this ghost for awhile, but wasn't able to come up with an idea to get it to float around until now. The tongue makes the perfect stand for this Amazing module.

Split the main ghost in two easy to print pieces. Orient the flat spots on the build plate and other than the supports for the pin holes no other supports are required.

The mouth insert and tongue print out and fit great at 100% or what ever scale you desire.

The eyes can be a bit tricky to pop into place, Study the module around the eyes and orient them correctly, placing the bottom part of the eye in place then pushing the rest in with a pen does the trick for me. If you have too much difficulty popping them in place try scaling them down 1%

Make sure to put the mouth insert in place before attempting to press the teeth in. It just makes thing easier. The teeth should fit in fine printed at 100% but once again, if they are too much trouble try scaling them down 1%

Thanks for checking out my design!!

UPDATE 1/10/22 Added a loose fit teeth file. if you are haveing problems fitting the regular teeth in the model try this one with added tolerances. hopefully this helps.

You can follow me on instagram, https://www.instagram.com/pla.n.pa/

to find out what I designs I am currently working on

If your interested in selling prints of my designs, become a Patreon supporter here…
https://patreon.com/planpa3d