April 2, 2023
Description
This is mainly for my custom hotend. Sprite extruder with CHC heater. The two fan paths have been separated. The ducts are 5mm longer to center them on the nozzle. The air outlets are 3mm closer to the nozzle and have a 20 degree angle. Numerous changes to the body to strengthen it, and mounting holes enlarged slightly.
Updated V2: I have added another option. I did a 10 degree rotate on the end to get air blowing down under the nozzle more. Testing shows this to be better. Everything else is the same just more rotation at the air outlet.
License:
Creative Commons — Attribution
7
53Aries
