LaserPecker 4 Unit Magnetic Shield Holder - Short

LaserPecker 4 Unit Magnetic Shield Holder - Short

To hold the magnetic shield on the LaserPecker 4 unit.

Please print the test handle to see if suits your printer calibration.

Permission to post on behalf of Mark Blanchard - Kviljo Laser

His post in the LaserPecker 4 FB User Group:  https://www.facebook.com/groups/lp4users/posts/2275812305923112

I made holders for the magnetic shields that were supplied with my LP2, I have no idea if they fit other shields as I have no others. The shields are supplied in sets of 4, so the one file contains 3x very stable table stands for 1 shield in each. The two other files are for attaching to the LP4 itself and hold a shield in front of the engraving area. These were designed based on the focal length of my LP4, there will likely be small discrepancies between models, so these holders can very easily be shimmed up if the fit is too tight. Shimming down is a bit more difficult

Below is a link to the YouTube film demonstrating the use of these different holders