Sovol SV06 Backpack

The best places I’ve found to mount a Pi on the Sovol SV06 and SV06 Plus require drilling and tapping so I came up with this “backpack” concept to clip onto the controller housing. It lightly plays into PLA’s compliance to hold firm and has a standard VESA 75x75 mounting pattern which matches a popular Pi case.

Mount accessories with M4 bolts and nuts or use M3 heat-set inserts (M3, OD:5mm, Height: 4mm).

I recommend printing with PLA. No supports needed.

Step file included for easier remixing.