Slim X Endstop - Ender 3 V2 Neo

Slim Adjustable X Endstop Limit Switch for the Ender 3 V2 Neo

Increases visibility and access to the X axis belt for checking alignment and shimming.
Frees up one mounting point for other uses.

Position A : Original 
Position B : -8.4 mm 

In case there is not enough clearance between the belt and the casing when the tool head is next to the switch, consider installing this mod ( You should do that anyways :) )

X Belt Shims - Ender 3 V2 Neo

Hardware:

Reuses Original hardware

Installation:

-Remove the original cover by removing the two screws (top and botton) and the connector
-Remove the PCB holding the switch, and strip the hot glue
-Insert the PCB into the Inner Shell
-Insert the A or B shim
-Insert the Inner Shell into the Outer Shell
-Plugin the connector
-Slide the new case onto the lower bracket and attach the screw
-Move the tool head and check for belt clearance 



You can also consider this upgrade to make your X belt path buttery smooth:
X Belt Tensioner - Ender 3 V2 Neo

Enjoy!