March 24, 2023
Description
What you have here is your standard replacement foot for a KitchenAid Stand Mixer model# KSM95ER. Printed the foot at .2 LH with a .5 nozzle out of PLA then attached a 2.3mm thick piece of that fuzzy stuff you use to put on the bottom of furniture to keep it from scratching your hardwood floors.
I've included a full size model (to make up for the thickness of the felt pad) in case you want to print from TPU or something. Not sure if that will work, but have a blast.
License:
Creative Commons — Attribution — Noncommercial
Sean Starkey
